Pneumatic

pneumatic tool, air tool, air-powered tool or pneumatic-powered tool is a type of power tool, driven by compressed air, supplied by an air compressor. Pneumatic tools can also be...

pneumatic tool, air tool, air-powered tool or pneumatic-powered tool is a type of power tool, driven by compressed air, supplied by an air compressor. Pneumatic tools can also be driven by compressed carbon dioxide (CO2) stored in small cylinders allowing for portability. Most pneumatic tools convert the compressed air to work using a pneumatic motor.

Compared to their electric power tool equivalents, they are safer to run and maintain, without risk of sparks, short-circuiting or electrocution, and have a higher weight to power ratio, allowing a smaller, lighter tool to accomplish the same task. Furthermore, they are less likely to self-destruct in case the tool is jammed or overloaded. General grade pneumatic tools with short life span are commonly cheaper and are also called disposable tools in tooling industries while industrial grade pneumatic tools with long life span are more expensive. In general, pneumatic tools are cheaper than the equivalent electric-powered tools. Regular lubrication of the tools is still needed however.

Disadvantages are the need for an air compressor, pneumatic tubing and pneumatic couplings.[2] Air tools were formerly unpopular in the DIY (Do it yourself) market, but are becoming increasingly popular due to costs decreasing, and have always been ubiquitous in industrial and manufacturing

Most pneumatic tools are to be supplied with compressed air at 4 to 6 bar.

We stock all of the below

  • Air ratchet
  • Airbrush
  • Blow Gun
  • Jackhammer
  • Pneumatic hammer
  • Air hammer (forging)
  • Air hammer (pile driver)
  • Pneumatic angle grinder
  • Pneumatic drill
  • Pneumatic impact wrench
  • Pneumatic jack (device)
  • Pneumatic sander
  • Pneumatic nail gun
  • Pneumatic riveter 
  • Pneumatic saw
  • Pneumatic screwdriver
  • Pneumatic scraper
  • Pneumatic wood borer
  • sandblaster
  • Paint sprayer
  • riveting hammer
  • Needle scaler
  • Low vibration air saw
  • Low vibration air file
  • Shock reduced air hammer
  • Shock reduced riveting hammer

More

Active filters

  • New

Ferm Compressor 2HP - 50L -...

The FERM CRM1045 compressor completes every job quickly and easily: performing tacker work to inflate a tyre. With additional pneumatic tools, the powerful 1100W machine is suitable  for a wide range of tasks such as:-

-  Painting surfaces easily with the paint spray gun 
-  Remove dust and sawdust with a air blow gun
-  Finish furniture, cabinets or panels with a pneumatic tacker

Price ₹15,500.00
Back to top